The pulser pump is about 20 years old (a river powered pump with no moving parts) and is simple appropriate technology
Brian White
BC
Canada
shows a generalized "mechanical mathematician" for making cob parabolic dishes or for making cob moulds for parabolic reflectors. Hopefully this will be accurate enough to make large moulds for big specalized parabolic dish reflectors.
The tracking solar accumulator is an experimental system to make and use a semi automatic tracking solar parabolic reflector to accumulate heat for various uses.
Every part of the experimental unit was made in my backyard from junk and fairly cheap readily available items.
The unit works moderately well and proves the concept.
Simple diy tracking was added soon after the video was taken
This video shows how to mix cob and briefly demonstrates wall construction using cob.
Yemeni earth architects: Architecture constructed of mud brick (adobe), rammed earth (pisé), compressed earth block or other methods of earthen construction
:: Next Page >>
This is a collection of existing videos on Sustainable and Appropriate Solutions used in the world today.The videos are divided by topics into several categories and sub-categories (see below).
| Next >
| Sun | Mon | Tue | Wed | Thu | Fri | Sat |
|---|---|---|---|---|---|---|
| << < | > >> | |||||
| 1 | 2 | 3 | ||||
| 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 11 | 12 | 13 | 14 | 15 | 16 | 17 |
| 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| 25 | 26 | 27 | 28 | 29 | 30 | 31 |